|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ARCHER RUBBER CO. |
|
|
|
|
|
|
|
|
213 CENTRAL STREET |
|
|
|
|
|
|
|
|
|
MILFORD, MA 01757-3458 |
|
|
|
|
|
|
|
|
TEL: (508) 473-1870 |
|
|
|
|
|
|
|
|
|
FAX: (508) 478-7078 |
|
|
|
|
|
|
|
|
|
www.archerrubber.com |
|
|
|
|
|
|
|
|
|
sales@archerrubber.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Engineered Coated Fabrics |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| STYLE# |
2225 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DESCRIPTION / CONSTRUCTION |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| HYPALON ON POLYESTER CURED |
|
|
|
|
|
|
|
|
|
|
|
|
|
| AREAS OF APPLICATIONS |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| BELLOWS |
|
|
|
|
|
|
|
|
|
|
|
|
|
| CHARACTERITICS / PHYSICAL PROPERTIES |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| TEST / METHOD |
|
|
|
Federal Standard 191A or ASTM |
|
|
REQUIREMENT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Finished Weight (Oz./Sq.Yd.
min. to max.) |
Method 5041 |
|
|
14.0 to 18.0 |
|
|
| Breaking Strength (lbs. Min."Grab") |
|
Method ASTM D751 |
|
|
Warp 250 Fill 250 |
|
|
| Tearing strength, Lbs Min. (Tongue) |
Method ASTM D751 |
|
|
Warp 30.0 Fill 30.0 |
|
|
| Coating Adhesions, Lb/In Width
Min. |
Method ASTM D751 |
|
|
5.0 |
|
|
|
| Burst Resistance, PSI Min. |
|
Method ASTM D751 |
|
|
650 |
|
|
|
| Gauge, Inches |
|
|
|
|
|
|
0.014 to 0.018 |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The
information contained herein was developed in our laboratories and
is believed reliable. It is offered in good faith. However, |
|
| as prospective users conditions
and methods of use are beyond our control, we recommend the user determine
the suitability |
|
| of this product before adapting
our materials on a commercial scale. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|